- Brand: POR-15
- Scent: UnscentedΒ
- Item Form: Liquid
- Item Volume: 1 Gallons
- Contains Liquid Contents: Yes
- β WHY CHOSE POR-15 CLEANER DEGREASER? – With POR-15 Cleaner Degreaser the applications are endless. It works quickly and efficiently on a variety of surfaces to remove grease, oil, soap films, wax, & more. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts, and more
- β WATER BASED – Unlike most solvent-based cleaners POR-15 Non-flammable Cleaner Degreaser, is water based so it cleans without leaving films. It makes petroleum-based cleaners almost obsolete because POR-15 Cleaner Degreaser can be diluted with water up to 4 to 10 times its volume while remaining more potent than other cleaners
- β APPLICATIONS – POR-15 Cleaner Degreaser should be diluted with hot water. Four parts water to one part Cleaner Degreaser (4:1) works well for most jobs; but may be diluted up to ten parts water to one part Cleaner Degreaser (10:1). After using Cleaner Degreaser rinse the area thoroughly with water. Metal Surfaces cleaned with Cleaner Degreaser should always then be treated with POR-15 Metal Prep before painting.
- β WHEN DO I NEED THIS? – Our cleaner degreaser removes dirt, grit, and oxidation that can cause corrosion on engines, machinery, tools, tires, rims, and undercarriages. Cleaner Degreaser is essential to clean any bare or rusted metal for paint as it leaves behind zero films promoting superior adhesion.
- β OUR SATISFACTION COMMITMENT β At POR-15 we strive to bring the ultimate in rust prevention. Known for the unbeatable 3-step stop rust system, POR-15 is trusted by DIY & Professionals. We are committed to innovation, quality control, and excellent customer service.












wtrks2e –
This is the go to degreaser when you plan on using the POR-15 rust preventive coating. Dissolve 1 part degreaser into 4 parts water, then brush on or spray on, let sit 10-15 minutes, then hose off. For step 2, you have to use their Metal-Prep after using the degreaser. The metal prep is not diluted, and poured into an empty windex sprayer bottle and sprayed onto each part, let sit 10-15 minutes, hose off. (there can be white powder on the part after using the metal prep, which a result of the chemical reactions). Step 3 is to brush on or spray on the rust preventive coating, using 2-3 thin coats. And don’t let it dry before each coat is applied.
seattle slim –
I used to flush a motorcycle fuel tank that was stored for 30 years. It was full of thick varnish and gunk. This product cut right thru.
ALEBB Book Blog –
Very happy with my purchase
Franken Rods –
My rear differential broke in my truck in the middle of the street. I used this product to clean it up. The product cleaned the spot up so well, It was cleaner than the rest of the street. I now use this to clean my driveway, engines, and a lot of shop parts.
Amazon Customer –
Great product, works great.
Charles Zambori –
Good stuff, but will discolor aluminum if left to soak.
Tina Shema –
Using this product on a frame job for a vehicle and upon opening the box, found it was a little soggy and the seal was broken. About 1/3 was missing and since there are no returns, I am not able to exchange for a full container.Would recommend as a product but be cautious of the return if you run into this issue.
Carl Turner –
The item worked great.