- Material: Plastic
- Brand: Permatex
- Liquid Volume: 236 Milliliters
- Item Weight: 0.5 Pounds
- Recommended Uses For Product: Marine
- A highly refined blend of aluminum, copper, and graphite lubricants that is salt, corrosion, and moisture resistant
- Use for easy assembly and disassembly of metal parts; enables easier disassembly of parts exposed to high temperatures
- Use during assembly to prevent galling, corrosion, and seizing due to weathering or chemicals
- Temperature Range: -80°F to 1600°F (-51°C to 871°C)



































dr1254 –
Be cautious not to get it on your clothes, for it will leave a permanent stain. I have used this product for years and never had a problem with nuts and bolts seizing up. I found it extremely useful to remove the tire lugs on vehicles and trailers. I use it on everything that is exposed to moisture and dirt. The only negative thing I can say is, the application brush is too short. It will not reach all the material in the bottom of the jar. I use an artist’s wide bristle brush, to get to the material at the bottom of the jar. Although it may seem pricey, just for my home use, a jar lasts me about 3 years.
GeeBaby –
I tend to not use any anti seize but after trying to remove bolts after previous mechanic work on my car, these are a a headache saver when doing the next job because the only bolts I used anti seize on was my 09 civic for the strut tower brace was the only bolts that didn’t require hulk strength. Just like Franks Red Hot, I use this ish on everything (that I wouldn’t be removing on a regular basis).
willie v barbee jr –
Would recommend anyone who work o. Cars to add this to any bolt that may need to be removed again in near future! I like to have very few problems when removing bolts like when I have to change brake rotors, caliper ! This will help prevent the rust in these areas! Work smarter , not harder.
Kevin L. –
Perfect size and easy to use with the built-in applicator. If you haven’t used it before, you don’t want this to be easy to remove so that it lubricates your fasteners as you insert them to keep galvanic or thermal binding. You can remove it with acetone if you need a sparkling fastener, but this is my goto for all applications where I find screws binding or where I have dissimilar metals.
Overlin –
Everything from permatex works great. This product does a good job on spark plugs.
PLewis –
I would buy this product again…
Swittie –
Like the large container and integrated brush in cap.
Christopher A. Reynolds –
It has copper and other metals in it…I use it for nuts, bolts, brake rotors ect. Worth it’s weight in stretching it thin…this is what all the videos show that a poor slub puts a tiny bit on a 1/4″ bolt and the next thing you know he is covered in silver butter!! AKA= Silver Snot, Anti Sneeze, Silver Butter, Silver Slime, Slippery Silver, Anti Squeeze, ect. 😎🛠️