- Material: Graphite
- Brand: Loctite
- Package Information: Tube
- Liquid Volume: 1 Fluid Ounces
- Recommended Uses For Product: Lubricant
- Heavy-duty, temperature resistant, petroleum-based lubricant compound fortified with graphite and metallic flake
- Will not evaporate or harden in extreme cold or heat
- Use during assembly to prevent seizing, galling and corrosion
- Great for removal of spark plugs, cylinder head and exhaust head bolts
- Formulated for severe environments















Art Harrington –
Used this on my bikes pedals so that next time I take them off I don’t run the risk of stripping them. This stuff is messy! When you puncture the top make sure you don’t have the tube pressed because it will start to come out and make sure you have a rag available. The small tube is enough and will go a long way. I read a tip where this stuff can also be used on battery terminals. I will give this tip a try since my battery is developing a lot of white powder on the terminals.
Christian P. –
Used this for changing sparkplugs out. Perfect size tube for a small job like that. Still have half a tube left over after doing the plugs on a 4 cylinder motor. Will have enough left over for the next plug change. Lock tite is a great brand and have always had a good experience with this brand. Highly recommend
Mary Tucker –
Great product
Joe@1229 –
Works great
John P. –
it worked
Samuel Feldman –
The media could not be loaded. ย Seems to work but letโs see after a winter in Boston?
Tinker –
Very small item a big box, Amazon should have used an envelope.
.. –
Using a Q-tip to allow better control and avoid skin contact, I applied this to the threads of a galvanized bolt prior to screwing on the nut. Went on as smoothly as whipped cream. Then I covered the assembly with crushed stone and continued with my project. Will return in a few years to see how easy it will be to remove the nut.